Gometrics expands its product range for the gas detection sector with the addition of a new represented company, the multinational Crowcon Detection Instruments Ltd, based in the United Kingdom. Crowcon provides the best gas detection instruments and software designed to support companies in their safety, health and environmental improvements.
Gometrics and Yokogawa have reached a technical and service collaboration agreement in the field of process control for their operations in Spain. This agreement covers both advice on technical solutions for measurement and control of industrial processes as well as technical and after-sales service of instruments and related software.
Gometrics has a new area for calibration of balances, scales and standard masses in its laboratory. The laboratory is equipped with granite anti-vibration tables, high precision mass comparators and E2 type standard masses. Thanks to this state-of-the-art equipment, we can now offer a complete mass calibration service.
Gometrics has developed a solution for a renowned research center that enables the controlled supply of gases to a reactor. The project is a turnkey development – design, manufacture and commissioning – of a panel integrating more than 20 elements, three of which are from manufacturers represented by Gometrics: Brooks Instrument, Drastar and United Electric.
The Tinycal family has been modernized as a whole, both in terms of design and performance. Most of the devices have been improved in terms of resolution and accuracy compared to the previous model. These instruments, and all those that make up the Tinycal Series, have been developed by Gometrics for the adjustment and calibration of process instruments used in industry.
Gometrics participates in the 8th edition of Farmaforum, which will be held on October 5 and 6 at the IFEMA fairgrounds in Madrid. You will discover our thermostatic baths (Kambic), thermal validations (Live International), gas flow (Brooks), liquid flow bench (Yokogawa), pH simulators such as our T264 and many more products and services.
Gometrics will be present at the 7th Spanish Metrology Congress organized by the Spanish Metrology Center (CEM), on September 27-29, 2022 in Avila. We will show some of our spotlight products, such as the Gometrics Gas mixer, Furness Controls Extra low pressure primary standard, and Beamex ePG electric pressure pump, among others.
Gometrics continues to calibrate during July and August 2022. The pressure, temperature, humidity and electrical areas of our ISO17025-ENAC-accredited laboratory will remain active to serve you. You can send us your pressure gauges, transmitters, temperature probes, thermo-hygrometers, flowmeters, rotameters, multifunction calibrators, indicators, among other equipment. We will return them calibrated and adjusted as soon as possible.
It is official: we have received notification from the Spanish National Accreditation Body ENAC of a major expansion in the measurement and calibration capacity of our accredited laboratory. Thanks to this new scope, we will be able to better serve our customers’ calibration needs. This is a very important improvement in terms of temperature and relative humidity.
The T310 digital pressure gauge belongs to the renewed Tinycal series designed and manufactured by Gometrics. This portable instrument can perform both the tasks of a pressure gauge and a milliammeter at the touch of a key. This feature makes it possible to calibrate electronic pressure equipment – transmitters, converters, etc. – using a single instrument.
Do you want to implement a truly effective system for validation and thermal mapping of storage areas, cold rooms, freeze dryers, autoclaves, freezers or refrigerators? Lives International has created the XpertLog Lite GMP-RF and GMP-ST, a simple set of equipment, ideal for starting a validation project in the food industry.
Gometrics continues to enhance its Tinycal range with the new T244 resistance thermometer simulator, a stand-alone electronic device designed for the verification and calibration of Pt100 temperature sensors. The measurement function allows the temperature measured by the probe to be displayed on the screen. The simulation function generates the electronic signal equivalent to the temperature value to be simulated. Supports pulsating excitation current.
It was a pleasure to welcome the Beamex sales management team to Gometrics on March 10. The visit provided an opportunity to learn more about
Being a Gometrics customer has many advantages! If you have one of the devices listed in the article, you can extend your warranty by an additional two years.
At Gometrics we are experts in temperature and humidity calibration. That is why we carry out the characterisation of isothermal media on a regular basis. In this way, we always have our temperature measuring systems ready.
Gometrics has launched a new e-commerce site. On this new website you can order from anywhere in the world and find our instruments for the measurement and calibration of pressure, temperature, gas mixture and electrical signals.
Gometrics has performed the validation (IQ/OQ) of Lives International ‘s XpertLog® thermal validation system for the CZ Vaccines laboratory based in Pontevedra, Spain. CZ Vaccines
Gometrics has been notified by ENAC of a major improvement in the scope of accreditation of its pressure laboratory. The main aspects of this upgrade are the extension of the hydraulic pressure accreditation up to 1400 bar and the excellent CMC, especially between 50 bar and 1000 bar.
Gometrics will participate in the seventh edition of Farmaforum 2021, the Pharmaceutical, Biopharmaceutical and Laboratory Technologies Industry Forum, on November 3 and 4 at the IFEMA fairgrounds in Madrid. We look forward to welcoming you and informing you about our new products in Hall 7, Stand C26-C28.
United Electric launches Excela, an electronic pressure/temperature switch designed to replace mechanical switches. It is easy to program, install, use and maintain.
Some COVID-19 vaccines require storage at ultra-low temperatures ranging from -86°C to -45°C. For this purpose, we offer a thermal validation service and supply temperature recorders for deep freezers.
Thanks to its experience in the biotechnology and biopharmaceutical sectors, Brooks has designed a range of biotechnological mass flow controllers specifically for bioprocesses.
Gometrics is still calibrating in this summer season. Our ENAC pressure, temperature, humidity and electrical laboratories remain open for service. Entrust us with your equipment: pressure gauges, transmitters, temperature probes, flowmeters, rotameters, multifunction gauges, indicators.
As a result of the last follow-up audit carried out last March, Gometrics obtained, on April 5, 2019, the Certificate of new accredited scope of calibration in the temperature magnitude.
It’s with great enthusiasm that we present our new corporate video in the english version, our areas of expertise are here illustrated in a creative and graphic way. We hope you like it!
Gometrics and Beamex will be present in Farmaforum with their most innovative products. The Forum of the Pharmaceutical, Biopharmaceutical, Cosmetic and Laboratory Technology Industry, to be held in Madrid on March 28th and 29th, 2019 in Hall 8 of IFEMA
Gometrics will participate in the new edition of Gastech Exhibition & Conference fair that will be held in Barcelona at the Fira Gran Via (Spain). VISIT US ON STAND H163 – Gometrics will be present with its products in addition to the products of its represented: Beamex, EP-E Gmbh, Riken Keiki y United Electric Controls.
Gometrics has obtained the certificate of the new accreditation scope ENAC in temperature, humidity and electrical simulation (temperature).
It is important to avoid overheating, so if the temperature is not guaranteed passively, you have to control and be able to regulate the room’s ambient temperature.
Gometrics has obtained on August 8, 2017 the certificate of the new scope of accreditation under pressure, reviewed in the last follow-up audit conducted during the month of June.
Gometrics has proven its innovative character over the last few years through its activity of design and development of measuring instruments. The company has thus obtained the recognition of innovative SME, issued by the Ministry of Economy and Competitiveness (Mineco).
The ISO 9001: 2005 certificate confirms the good practices of Gometrics and recognizes the maturity and effectiveness of its integrated quality management system while at the same time confirming its constant commitment to lead its organization in a professional and focused way to continuous improvement.
The Beamex MC6 advanced field calibrator has been designed for calibration and adjustment of pressure, temperature and electrical signal instruments directly in the factories. This state-of-the-art calibrator allows measurements and calibrations of great accuracy, and has a fieldbus “communicator” function for instruments compatible with Hart, Foundation Fielbus and Profibus PA protocols.
[vc_single_image image=”6568″ img_size=”full” alignment=”center”] Gometrics has been present at the 6th Spanish Congress of Metrology organized by the Spanish Center of Metrology (CEM), 6-9 June
[vc_single_image image=”5855″ alignment=”center”] United Electric has obtained SIL 2 certification for two of its star product lines: the Series 100 and Series 120 (ATEX explosion proof).
[vc_single_image image=”5280″ img_size=”full”] Gometrics has designed and developed a system for on-site calibration of flow meters that are installed in your mill. It is a
The Gometrics Technical Support team performed a comprehensive update of the Hanwell Synergy Software, used by Medichem for the recording of environmental conditions. Medichem is a pharmaceutical
Gometrics organized, on March 16 and 17 2017, an in-house training about Flow measurement methods, given by Amalio Belinchon Díaz, expert in this field. The main object
[vc_single_image image=”4361″ img_size=”full” onclick=”custom_link” img_link_target=”_blank” link=”https://www.beamex.com/es/”] BEAMEX has launched a new web platform in Spanish, with the aim of providing Spanish-speaking visitors with precise and
During this cold season, BPD (Good Practices of Pharmaceutical Distribution) requires a thermal mapping and / or rating, to record and document the temperatures of
[vc_single_image image=”4580″ img_size=”medium”] DK-Lok is one of the world’s leading manufacturers of connectors, valves, filters and quick connectors. These products are designed for the chemical,
[vc_single_image image=”4361″ img_size=”full”] Beamex ha desarrollado una nueva solución para dispositivos móviles, que permite llevar a cabo las tareas de comprobación relacionadas con las inspecciones
As part of its University-Business collaboration policy, Gometrics was pleased to receive a visit from Professor Roger Rangel, head of the Mechanical and Aerospace Engineering
[interactive_banner banner_title=”ENAC Accreditation” banner_title_location=”left” banner_desc=”Acreditación 230/LC10.194″ banner_image=”id^3176|url^https://www.gometrics.net/wp-content/uploads/Certificado-ENAC.jpg|caption^null|alt^null|title^Certificado ENAC|description^null” link_opts=”box” banner_link=”url:http%3A%2F%2Fgometrics.net%2Fpdf%2FCertificaciones%2FCERT_2961_LC_10_194_rev0.pdf||target:%20_blank|” banner_style=”style11″ banner_bg_color=”” banner_overlay_bg_color=”” banner_title_font_size=”desktop:0px;” banner_title_line_height=”desktop:0px;” banner_desc_font_size=”desktop:20px;” banner_desc_line_height=”desktop:30px;”] We are glad to announce that, on July
Gometrics is glad to announce the launch of its new website After several months of intense work, we are proud to present a new digital
The European Patent Office has granted Gometrics a European patent for the design and innovative engineering of the MGP-2 reference gas mixer.
This device is notable for its unique turbulation system and its solution for handling the use of oxidant and corrosive gases, minimizing the risk of crossed interferences.
On 22nd and 23rd October 2015, Gometrics presented at its facilities in Madrid the new controller Fluke 6270A> from Fluke Calibration. .[vc_single_image image=”3077″ img_size=”full”] This
[vc_single_image image=”3134″ img_size=”full” alignment=”center”] GOMETRICS announces the expansion of its range of products for the calibration or quality assurance sector with the addition of a
[vc_row margin_top=”10″ bg_type=”no_bg”][vc_single_image image=”1579″ img_size=”full”] We are pleased to announce our participation in the second edition of PharmaProcess, which will take place in Barcelona on
[vc_row margin_top=”10″ bg_type=”no_bg”]The 6270A Pressure Calibrator supports combination of up to five measuring modules, so you can calibrate instruments with ranges from vacuum to 20
The certification organization Bureau Veritas granted Gometrics certification ISO 9001: 2008, number ES057403-1 on 05/07/2014. Bureau Veritas certifies that Gometrics management system was audited and
Concepts such as international expansion, integration of manufacturing processes and other topics will be the protagonists of the Industrial and Technological Summit that will be
Gometrics renews its Quality Management system and extends the scope for validations and thermal qualifications activity
Gometrics will soon participate to 2013 Summit in Bilbao and Pharmaprocess in Barcelona.
Metal Carbides presented Rotterdam a paper on the accreditation of multicomponent calibration mixtures, which serve to calibrate analyzers for emission control. For this project, the technical team has intensively used the Gometrics MGP-2 gas mixer, which has proven its repeatability and reliability.
Gometrics is participating as an exhibitor from 12th to 14th June to the 5th Spanish Congress of Metrology held in Madrid.
Gometrics has created a new microsite for the MGP-2 gas mixer, which includes features and applications of the instrument, technical files and contact forms. The microsite is originally created in English for better international projection and translated to other languages.
Gometrics became an exclusive distributor since 2011 forGlobal Energy Innovations GEI equipments. This company is a company located in the USA, focused on the development
Gometrics will announce its gas mixing equipment MGP-2 in ChemBio fair, to take place on 20 and 21 March in Finland.
This event is considered the most important meeting point for professionals in chemistry and biotechnology.
The German company HORNUNG, which has been designing and manufacturing a wide range of pressure regulators and systems with all German materials for more than
Pol. Ind. Riera de Caldes
c/ Basters, 17
08184 Palau-Solità i Plegamans
Barcelona – Spain
T. +34 93 864 68 43
info@gometrics.net
