DATA SHEET |
| Maximum working range | Vacuum upt tu 2100 psi (144 bar) |
| Resists until | 6000 psi |
| Sensitivity | 0,0005 psi |
| Number of rounds | 61 |
| Internal volume | 57 cm3 |
| Maximum diferential pressure between camaras | 7 bar |
| Three control elements |
|
Pressure stabilizer BCU2
The BCU-2 pressure stabilizer is a desktop device designed to facilitate the calibration of pneumatic instruments.
The high resolution of the BCU-2, together with its capacity to generate pressure or vacuum, make it an ideal instrument for low pressure (below 1 psi) for calibrating and carrying out essays.
The stabilizer disposes of two pressure output at the front via push fit coupling and one at the rear with power supply 1/8” NPT H. From a regulated pressure source, it can adjust any pressure value with and precision/sensitivity of 0.0005 psi (0.03 mbar).
CHARACTERISTICS
- Three control elements
- Two front pressure outlets via quick coupling and one rear 1/8" NPT H supply outlet.
ADVANTAGES
- Facilitates calibration of pneumatic instruments
- Adjusts any pressure value with a sensitivity of 0.0005 psi (0.03 mbar) from a regulated pressure source
APPLICATIONS
- Ideal for low pressure testing and calibration
- Calibration of pneumatic instruments
Other customers bought
Related products
-
Basic calibration tools
Intrinsically safe communicator and gauge Beamex MC6-Ex
The Beamex MC6-Ex is an advanced calibrator and communicator, highly accurate with exceptional functionality. It is a multifunction calibrator-documenter and communicator, which offers the capability to calibrate pressure, temperature and electrical signal measuring instruments. It also contains a field communicator for HART, Foundation Fieldbus and Profibus PA instruments.
MC6-Ex is an IEC and ATEX certified calibrator and can be used in any Ex zone / Ex division, even in the most demanding zones (Zone 0 / Division 1). The certification classification is Ex II 1 G and Ex ia IIC T4 Ga.
Its rugged, dust- and water-resistant IP65 rated housing, along with its ergonomic design and ease of use make the MC6-Ex an ideal device for field use.
The MC6-Ex communicates with the Beamex calibration management software, which allows fully automated calibration and documentation without the use of paper. MC6-Ex can also be part of the paperless integration with the customer’s ERP system.
Download brochure
Translated with www.DeepL.com/Translator
-
Basic calibration tools
BP102G pressure generating pump
The Gometrics model BP102G manual generation pump is a manual compressor capable of generating up to 10 bar of pressure in closed circuits without volumetric consumption for fine adjustment of the desired pressure.
It is a light and small pump with a purge system to zero the loop and a connection to the instrument to be calibrated.
It has a simple system of pneumatic pressure generation without the need of mains supply, being ideal for calibration operations “in situ” of pneumatic instruments, low pressure measuring equipment, simulation of signals for process ΔP transmitters, pressure switches, valve positioners, pressure gauges, etc.
-
Basic calibration tools
Pressure generation pump BP100V
The Gometrics Model BP100V hand pump is a manual compressor capable of generating up to -0.999 mbar vacuum in closed circuits without volumetric consumption for fine adjustment of the desired pressure.
It is a small, lightweight pump with a purge system for zeroing the loop and a connection to the instrument to be calibrated.
It has a simple system of pneumatic pressure generation without the need for mains supply, being ideal for on-site calibration operations of pneumatic instruments, low pressure measuring equipment, simulation of signals for the processing of P transmitters, pressure switches, valve positioners, pressure gauges, etc.
-
Trolleys, suitcases, cases and accessories
MAN-01 Nitrogen recovery case
The MAN-01 portable case is designed to recover N² from aircraft tires for regulation and reuse in other functions, such as in lifting gear for changing wheels.
It comprises a model 1400 (or higher) case, a pressure regulator, a needle pressure gauge and a pair of 1.2 m input and output connection lines.
-
Trolleys, suitcases, cases and accessories
C-8B Nitrogen service trolley
C-8B Nitrogen service trolley
The equipment is manufactured by Gometrics for a range of pneumatic functions such as bottle filling (a maximum of 8/10 bottles up to 3100 psi) and input pressure regulation at different pressure ranges.
When the bottles are full, the C-8B unit can control the pressure in them via three pneumatic outputs, two of which the operator can individually adjust using a pressure regulator and their corresponding pressure gauges. The third output is the only one of the three that is preset in the factory using an internal regulator set and sealed at approximately 120 psi.
Pressure readings can also be taken from a pressure gauge associated with the output of this regulator.
-
Trolleys, suitcases, cases and accessories
PMC-001-HK Pressure control portable system
The PMC-001-HK is a portable system manufactured by Gometrics for the control, multiplication and indication of high pressure nitrogen supply pressure.
The system has been designed to provide a continuous supply of gas to the system, controlling and indicating the working pressure autonomously and independently.
It allows multiple variables of the supply, by means of a portable nitrogen bottle, attached to the rear of the equipment by means of flanges or by means of a compressor.
The equipment is installed on a wheeled frame with handles that provides mobility and can be easily transported to the desired place of operation.
For safe fastening, the trolley has an anchorage between the wheels of the equipment to secure it to the floor by means of straps and prevent it from falling.
-
Basic calibration tools
MC2 multifunction calibrator
The MC2 series includes two portable calibrators for fieldwork: the MC2 temperature/electrical signal calibrator and the MC2 multifunction calibrator.
The MC2 is a compact and easy-to-use portable calibrator. It has a large graphic display, a menu-based interface and a full numeric keypad.
Like all BEAMEX calibrators, the MC2 is a benchmark and a high commitment to quality.
Download datasheet
-
Isothermic media
TCT-450/TCT-450H Calibration dryblocks
The Gometrics TCT-450 and TCT-450H calibration furnaces are portable instruments designed for fast and accurate heat generation for the verification of temperature sensors such as resistance thermometers, thermocouples, etc.
The temperature of these dry-well furnaces is controlled by a highly stable RTD type sensor assembly and a digital controller with Fuzzy + PID functions with set point and system temperature indication.
The controller output goes to a power supply specially designed to quickly reach the desired set point temperature, ensuring high stability in the system, allowing calibrations and verifications of the elements by comparison with a reference standard probe or standard thermometer.
