The DPM-500 digital pressure gauges are microprocessor-based programmable calibration instruments that can be configured from the keypad.
Features such as configuration of high and low alarms, differential alarms, peak & valley, etc., are quickly and easily accessible, allowing the instrument to be adapted to any application or new process requirements.
The DPM-500 incorporates a strain gauge type pressure transducer in a box with a front keypad of standardized dimensions.
Renewal plan: exchange your DPM-500 for the new DPM-600 model.
Learn more about the new DPM-600 programmable digital panel pressure gauge.
Technical data |
| Display | Five 7-segment red LED type digits, 12 mm high |
| Ranges | Min. 0-25 mbar and Max. 0-350 bar (0-1000 bar with remote sensor) |
| Accuracy | +0.25% FS or +0.10% FS |
| Reading limit | -19999 a 99999 |
| Resolution | 1/40000 dots |
| Operating temperature | 0 – 50 ºC |
| Relative humidity | 0-95% non-condensing |
| Temperature effect | ± 0.02% / ºC |
| Process Connection | 1/8″ NPT H |
| Electrical connection | Plug-in power strip for 1.5 mm² cables with fixing screw |
| Power supply | 220/110 V a.c. selectable (±10%) |
| Frequency | 48-62 Hz |
| Alarms | 2 SPDT 6A 220V (resistive) type switched relays |
| Output | Analog (optional) 0-10 V or 0/4-20 mA selectable via internal jumper and scalable according to programmed display indication |
| Dimensions | 1/8 DIN – 48 x 96 x 180 mm |
| Weight | 500 grams |
