C-8B Nitrogen service trolley

The equipment is manufactured by Gometrics for a range of pneumatic functions such as bottle filling (a maximum of 8/10 bottles up to 3100 psi) and input pressure regulation at different pressure ranges.

When the bottles are full, the C-8B unit can control the pressure in them via three pneumatic outputs, two of which the operator can individually adjust using a pressure regulator and their corresponding pressure gauges. The third output is the only one of the three that is preset in the factory using an internal regulator set and sealed at approximately 120 psi.

Pressure readings can also be taken from a pressure gauge associated with the output of this regulator.

CHARACTERISTICS

Supply Pressure: 3100 psi, dry air or nitrogen
High pressure outlet pressure: 3100 psi
Medium pressure outlet pressure: 400 psi
Jack pressure outlet pressure: 120 psi

ADVANTAGES

Great pressure autonomy because it can transport 8 to 10 3,000 psi bottles
Possibility of recharging the bottles, without disassembling them, through the control panel
Regulation at different pressure levels

APPLICATIONS

Pneumatic functions such as bottle filling and inlet pressure regulation at different pressure ranges
Aircraft maintenance in aeronautical maintenance hangars or on the runways themselves

Description

DATA SHEET

Technical caracteristics of the trolley
Maximum speed for moving the equipment	25 Km/h
Maximum pressure of filling	3100 psi
Loading pressure in high pressure	3000 psi
Loading pressure in low pressure	400 psi
Number of bottles of the equipment	8/10
Geometric capacity per bottle40 LAir capacity per bottle	10 m³
Total air capacity per equipment	100 m³
Neumatic wheelsFront:	400-8 6
PR, Rear:	480-10 4 PR
Technical features control panel
Connections	3/8
AN Screw	Ø 3/8 OD Internal materials
Stainless steal	316
Output pressure average pressure	400 psi
Output pressure jacks pressure	120 psi
Working temperature	0ºC to 60ºC
Wharehouse temperature	-20 to 60ºC